Checking the Print Head Nozzles
Using the Nozzle Check utility for Windows
Using the printer buttons
If you find that the printout is unexpectedly faint or that dots are missing, you may be able to identify the problem by checking the print head nozzles.
You can check the print head nozzles from your computer by using the Nozzle Check utility or from the printer by using the buttons.
Using the Nozzle Check utility for Windows
Follow the steps below to use the Nozzle Check utility.
![](files/step_1.gif) |
Make sure that A4 size paper is loaded in the sheet feeder.
|
![](files/step_2.gif) |
Access the printer driver.
|
![](files/step_3.gif) |
Click the Maintenance tab, then click the Nozzle Check button.
|
![](files/step_4.gif) |
Follow the on-screen instructions.
|
Using the printer buttons
Follow the steps below to check the print head nozzles using the printer buttons.
![](files/step_1.gif) |
Make sure that A4 paper is loaded in the sheet feeder.
|
![](files/step_2.gif) |
Make sure that this printer is off.
|
Compare the quality of the printed check page with the sample shown below. If there are no print quality problems, such as gaps or missing segments in the test lines, the print head is fine.
If any segment of the printed lines is missing, as shown below, this could mean a clogged ink nozzle or a misaligned print head.
|