![](files/01.gif) |
If you need to move your scanner some distance, you need to prepare it for transportation in its original box or one of a similar size.
![](files/step_1.gif) |
Remove all paper from the sheet feeder and make sure the scanner is off.
|
![](files/step_2.gif) |
Open the scanner unit and make sure the print head is in the home position on the right.
|
Secure the ink cartridge holder to the case with tape as shown, then close the scanner unit.
![](files/step_3.gif) |
Unplug the power cord from the electrical outlet. Then disconnect the USB cable from your computer.
|
![](files/step_4.gif) |
Close the paper support, feeder guard, and output tray.
|
![](files/step_5.gif) |
Repack the scanner in the original box using the protective materials that came with it.
|
Keep the level as you transport it. After you move it, remove the tape securing the print head.
| ![](files/01.gif) |