Reference Guide

Index Search Glossary Contents Help

Copying / How to Copy

Standard Copying

Follow the steps in Loading Paper.

Follow the steps in Placing Photos and Documents on the Document Table.

Press the number of copies button repeatedly until the desired number of copies between 1 to 3 is selected on the control panel.

Each time you press the Number of Copies button, the LED changes as follows:

Light	Number
	1 copy
	2 copies
	3 copies

Note:

You can only select a maximum of three copies at one time.

After approximately every 10 sheets have been copied, remove the sheets from the output tray.

Select the paper size in the following ways.

To copy documents:
Press the Media Select button to select A4 (plain paper).

To copy photographs:
Press the Media Select button to select 10 x 15 (photo paper).

Note:

When copying on plain paper, only Letter/A4 can be used. Conversely, when copying on photo paper, only 4"x6"/10x15 can be used. For more information about selecting the paper size, see Switching the Paper Size.

Press the  Start Color button to copy in color, or the  Start B&W button to copy in grayscale.

Caution:

Never open the scanner unit while scanning or copying; otherwise, you may damage this product.

Note:

Do not pull the paper being copied out of this product.

The copied image may not have exactly the same size as the original.

If the Ink light flashes to indicate low ink while you are copying, you can either continue making copies until the ink runs out, or stop making copies and then replace the ink cartridge.

[Top]