Command Lists

Your printer supports the EPSON ESC/P control codes and IBM 2380 Plus emulation control codes listed below.

Selecting an EPSON ESC/P printer in your software allows you to use advanced fonts and graphics.

General operation:
ESC@, ESC U, ESC EM

Paper feeding:
FF, LF, ESC 0, ESC 1, ESC 2, ESC 3, ESC A, CR

Page format:
ESC ( C, ESC C, ESC C 0, ESC Q, ESC l, ESC ( c, ESC N, ESC O, ESC (U

Print position motion:
ESC $, ESC \, ESC D, HT, ESC B, VT, ESC J

Font selection:
ESC k, ESC x, ESC y, ESC P, ESC M, ESC g, ESC p, ESC 4, ESC 5, ESC E, ESC F, ESC !

Font enhancement:
ESC W, DC4, SO, DC2, SI, ESC w, ESC G, ESC H, ESC T, ESC S, ESC -

Spacing:
ESC Space

Character handling:
ESC t, ESC (t, ESC R, ESC %, ESC &, ESC:, ESC I, IESC 6, ESC 7

Bit image:
ESC K, ESC L, ESC Y, ESC Z, ESC *, ESC ^

Color printing:
ESC r

Barcode:
ESC (B

This printer emulates the IBM Proprinter using the commands below. For detailed information, see the IBM 2380 Plus reference manual.

General operation:
NUL, DC3, ESC j, BEL, CAN, DC1, ESC Q, ESC [K, ESC U, ESC [F

Paper feeding:
FF, LF, ESC 5, ESC A, ESC 0, ESC 1, ESC 2, ESC 3, CR, ESC ]

Page format:
ESC C, ESC C0, ESC X, ESC N, ESC O, ESC 4

Print position motion:
ESC d, ESC R, ESC D, HT, ESC B, VT, ESC J

Font selection:
DC2, ESC P, ESC :, ESC E, ESC F, ESC I, ESC [d, ESC [I

Font enhancement:
DC4, SO, ESC SO, ESC W, ESC [@, SI, ESC SI, ESC G, ESC H, ESC T, ESC S, ESC -, ESC _

Spacing:
BS, SP

Character handling:
ESC 6, ESC 7, ESC [T, ESC ^, ESC \

Bit image:
ESC K, ESC L, ESC Y, ESC Z

Barcode:
ESC [f, ESC [p

Download:
ESC = (only Draft mode)