Control Panel

Selecting a Built-In Font and Pitch

Your printer comes with the twelve built-in fonts. See Electronic for information of fonts you can select. You can also change the pitch by turning the condensed mode on or off. You can select the font and pitch using the buttons on the printer's control panel as described below.

Note:

Settings you make in your application programs usually override settings you make from the printer's control panel. For best results, use your application to select a font and pitch.

Follow these steps to select a built-in font or pitch using the buttons on the printer's control panel:

Make sure that the printer is not printing. If it is, wait until printing has finished.

To select a font, press the Font button until the three Font lights indicate the font you want with a pattern shown on the control panel.

Note:

The Font button cannot directly select OCR-B, Orator, Orator-S, Script-C, Roman-T, or Sans Serif H. To select one of these fonts, you must first use the default-setting mode to register it as the "other" font and then select Others using the Font button.

Barcode fonts can not be selected via the control panel.

Press the Condensed button to turn the condensed mode on or off.

[Top]