 |
 |
|
||
 |
||||
Selecting a Font
You can select the printer’s fonts, pitch, and size by using the default-setting mode. See Changing default settings for instructions on how to change the default settings.
The available pitch or size depends on the font you select. See the table below for more information.
Bitmap font:
|
Font
|
Pitch
|
|
Draft
|
10, 12, 15
|
|
Roman
|
10, 12, 15, PS
|
|
Sans Serif
|
10, 12, 15, PS
|
|
Courier
|
10, 12, 15
|
|
Prestige
|
10, 12
|
|
Script
|
10
|
|
OCR-B
|
10
|
|
Orator
|
10
|
|
Orator-S
|
10
|
|
Script C
|
Proportional
|
Scalable font
|
Font
|
Size
|
|
Roman
|
10.5 pt, 8 pt to 32 pt (every 2 pt)
|
|
Sans Serif
|
10.5 pt, 8 pt to 32 pt (every 2 pt)
|
|
Roman T
|
10.5 pt, 8 pt to 32 pt (every 2 pt)
|
|
Sans Serif H
|
10.5 pt, 8 pt to 32 pt (every 2 pt)
|
Note:|
Settings you make in application programs usually override settings you make in the default-setting mode. For best results, use your application to select a font and make other settings.
|