Command Lists

Your printer supports the EPSON ESC/P2 control codes and IBM PPDS emulation control codes listed below.

Selecting an EPSON ESC/P2 printer in your software allows you to use advanced fonts and graphics.

General operation:
ESC@, ESC U

Paper feeding:
FF, LF, ESC 0, ESC 2, ESC 3, ESC +, CR

Page format:
ESC ( C, ESC C, ESC C 0, ESC Q, ESC l, ESC ( c, ESC N, ESC O

Print position motion:
ESC $, ESC \, ESC ( V, ESC ( v, ESC D, HT, ESC B, VT, ESC J

Font selection:
ESC k, ESC x, ESC y, ESC X, ESC P, ESC M, ESC g, ESC p, ESC 4,
ESC 5, ESC E, ESC F, ESC !

Font enhancement:
ESC W, DC 4, SO, DC2, SI, ESC w, ESC G, ESC H, ESC T, ESC S, ESC -, ESC ( -, ESC q

Spacing:
ESC Space, ESC c, ESC ( U

Character handling:
ESC t, ESC ( t, ESC R, ESC %, ESC &, ESC :, ESC 6, ESC 7, ESC ( ^

Bit image:
ESC *

Barcode:
ESC (B

Thai printing mode:
ESC (p

Production:
ESC │

This printer emulates the IBM Proprinter using the commands below.

General operation:
NUL, DC3, ESC j, BEL, CAN, DC1, ESC Q, ESC [ K, ESC U, ESC [ F

Paper feeding:
FF, LF, ESC 5, ESC A, ESC A (AGM*), ESC 0, ESC 1, ESC 2, ESC 3, ESC 3 (AGM*), CR, ESC ]

Page format:
ESC C, ESC C0, ESC X, ESC N, ESC O, ESC 4

Print position motion:
ESC d, ESC R, ESC D, HT, ESC B, VT, ESC J, ESC J (AGM*)

Font selection:
DC2, ESC P, ESC :, ESC E, ESC F, ESC I, ESC [d, ESC [I

Font enhancement:
DC4, SO, ESC SO, ESC W, ESC [ @, SI, ESC SI, ESC G, ESC H, ESC T, ESC S, ESC -, ESC _, ESC [ -

Spacing:
BS, SP, ESC [\

Character handling:
ESC 6, ESC 7, ESC [ T, ESC ^, ESC \

Bit image:
ESC K, ESC L, ESC Y, ESC Z, ESC [ g, ESC * (AGM*)

Barcode:
ESC [f, ESC [p

* Alternate Graphics Mode (A.G.M.)

* Effective when the A.G.M. is turned on in the default-setting mode.