Command Lists

Your printer supports the EPSON ESC/P 2 control codes and IBM 2390 Plus emulation control codes listed below.

Selecting an EPSON ESC/P2 printer in your software allows you to use advanced fonts and graphics.

General operation:
ESC@, ESC U, ESC EM

Paper feeding:
FF, LF, ESC 0, ESC 2, ESC 3, ESC +, CR

Page format:
ESC ( C, ESC C, ESC C 0, ESC Q, ESC l, ESC ( c, ESC N, ESC O

Print position motion:
ESC $, ESC \, ESC ( V, ESC ( v, ESC D, HT, ESC B, VT, ESC J

Font selection:
ESC k, ESC x, ESC y, ESC X, ESC P, ESC M, ESC g, ESC p, ESC 4, ESC 5, ESC E, ESC F, ESC !

Font enhancement:
ESC W, DC4, SO, DC2, SI, ESC w, ESC G, ESC H, ESC T, ESC S, ESC -, ESC (-, ESC q

Spacing:
ESC Space, ESC c, ESC ( U

Character handling:
ESC t, ESC (t, ESC R, ESC %, ESC &, ESC :, ESC 6, ESC 7, ESC (^

Bit image:
ESC *

Barcode:
ESC (B

Color printing:
ESC r

This printer emulates the IBM Proprinter using the commands below. For detailed information, see the IBM 2390 Plus reference manual.

General operation:
NUL, DC3, ESC j, BEL, CAN, DC1, ESC Q, ESC [ K, ESC U, ESC [ F

Paper feeding:
FF, LF, ESC 5, ESC A, ESC A (AGM*), ESC 0, ESC 1, ESC 2, ESC 3, ESC 3 (AGM*), CR, ESC ]

Page format:
ESC C, ESC C0, ESC X, ESC N, ESC O, ESC 4

Print position motion:
ESC d, ESC R, ESC D, HT, ESC B, VT, ESC J, ESC J (AGM*)

Font selection:
DC2, ESC P, ESC :, ESC E, ESC F, ESC I, ESC [d, ESC [I

Font enhancement:
DC4, SO, ESC SO, ESC W, ESC [ @, SI, ESC SI, ESC G, ESC H, ESC T, ESC S, ESC -, ESC _, ESC [-

Spacing:
BS, SP, ESC [\

Character handling:
ESC 6, ESC 7, ESC [T, ESC ^, ESC \

Bit image:
ESC K, ESC L, ESC Y, ESC Z, ESC [g, ESC*(AGM*)

Barcode:
ESC [f, ESC [p

Download:
Download Command is not provided.

* Alternate Graphics Mode