|
Command Lists
Your printer supports the EPSON ESC/P control codes and IBM PPDS emulation control codes listed below.
EPSON ESC/P 2 control codes
Selecting an EPSON ESC/P 2 printer in your software allows you to use advanced fonts and graphics.
General operation:
|
|
ESC @, ESC U
|
Paper feeding:
|
|
FF, LF, ESC 0, ESC 2, ESC 3, ESC +, CR
|
Page format:
|
|
ESC (C, ESC C, ESC C 0, ESC Q, ESC l, ESC (c, ESC N, ESC O
|
Print position motion:
|
|
ESC $, ESC \, ESC (V, ESC (v, ESC D, HT, ESC B, VT, ESC J
|
Font selection:
|
|
ESC k, ESC x, ESC y, ESC X, ESC P, ESC M, ESC g, ESC p, ESC 4, ESC 5, ESC E, ESC F, ESC !
|
Font enhancement:
|
|
ESC W, DC4, SO, DC2, SI, ESC w, ESC G, ESC H, ESC T, ESC S, ESC -, ESC (-, ESC q
|
Spacing:
|
|
ESC Space, ESC c, ESC (U
|
Character handling:
|
|
ESC t, ESC (t, ESC R, ESC %, ESC &, ESC :, ESC 6, ESC 7, ESC (^
|
Bit image:
|
|
ESC *
|
Bar code:
|
|
ESC (B
|
IBM PPDS emulation control codes
This printer emulates the IBM Proprinter using the commands below. For detailed information, see the IBM PPDS reference manual.
General operation:
|
|
NUL, DC3, ESC j, BEL, CAN, DC1, ESC Q, ESC [ K, ESC U
|
Paper feeding:
|
|
FF, LF, ESC 5, ESC A, ESC A (AGM),ESC 0, ESC 1, ESC 2, ESC 3, ESC 3 (AGM), CR, ESC ]
|
Page format:
|
|
ESC C, ESC C0, ESC X, ESC N, ESC O, ESC 4
|
Print position motion:
|
|
ESC d, ESC R, ESC D, HT, ESC B, VT, ESC J, ESC J (AGM)
|
Font selection:
|
|
DC2, ESC P, ESC :, ESC E, ESC F, ESC I, ESC [d, ESC [I
|
Font enhancement:
|
|
DC4, SO, ESC SO, ESC W, ESC [@, SI, ESC SI, ESC G, ESC H, ESC T, ESC S, ESC -, ESC _, ESC [-
|
Spacing:
|
|
BS, SP, ESC [¥
|
Character handling:
|
|
ESC 6, ESC 7, ESC [ T, ESC ^, ESC ¥
|
Bit image:
|
|
ESC K, ESC L, ESC Y, ESC Z, ESC [g, ESC * (AGM)
|
Bar code:
|
|
ESC [f, ESC [p
|
Download:
|
|
ESC =
|
| |