|
Command Lists
Your printer supports the EPSON ESC/P control codes and IBM PPDS emulation control codes listed below.
EPSON ESC/P 2 control codes
Selecting an EPSON ESC/P 2 printer in your software allows you to use advanced fonts and graphics.
General operation:
|
|
ESC @, ESC U
|
Paper feeding:
|
|
FF, LF, ESC 0, ESC 2, ESC 3, ESC +, CR
|
Page format:
|
|
ESC (C, ESC C, ESC C 0, ESC Q, ESC l, ESC (c, ESC N, ESC O
|
Print position motion:
|
|
ESC $, ESC \, ESC (V, ESC (v, ESC D, HT, ESC B, VT, ESC J
|
Font selection:
|
|
ESC k, ESC x, ESC y, ESC X, ESC P, ESC M, ESC g, ESC p, ESC 4, ESC 5, ESC E, ESC F, ESC !
|
Font enhancement:
|
|
ESC W, DC4, SO, DC2, SI, ESC w, ESC G, ESC H, ESC T, ESC S, ESC -, ESC (-, ESC q
|
Spacing:
|
|
ESC Space, ESC c, ESC (U
|
Character handling:
|
|
ESC t, ESC (t, ESC R, ESC %, ESC &, ESC :, ESC 6, ESC 7, ESC (^
|
Bit image:
|
|
ESC *
|
Bar code:
|
|
ESC (B
|
Thai printing mode *1:
|
|
ESC (p
|
Indian settings *2:
|
|
ESC (I, ESC (J, ESC (p
|
*1 This command is available for Thai model only.
*2 These commands are available for Indian model only.
IBM PPDS emulation control codes
This printer emulates the IBM Proprinter using the commands below. For detailed information, see the IBM PPDS reference manual.
General operation:
|
|
NUL, DC3, ESC j, BEL, CAN, DC1, ESC Q, ESC [ K, ESC U
|
Paper feeding:
|
|
FF, LF, ESC 5, ESC A, ESC A (AGM),ESC 0, ESC 1, ESC 2, ESC 3, ESC 3 (AGM), CR, ESC ]
|
Page format:
|
|
ESC C, ESC C0, ESC X, ESC N, ESC O, ESC 4
|
Print position motion:
|
|
ESC d, ESC R, ESC D, HT, ESC B, VT, ESC J, ESC J (AGM)
|
Font selection:
|
|
DC2, ESC P, ESC :, ESC E, ESC F, ESC I, ESC [d, ESC [I
|
Font enhancement:
|
|
DC4, SO, ESC SO, ESC W, ESC [@, SI, ESC SI, ESC G, ESC H, ESC T, ESC S, ESC -, ESC _, ESC [-
|
Spacing:
|
|
BS, SP, ESC [¥
|
Character handling:
|
|
ESC 6, ESC 7, ESC [ T, ESC ^, ESC ¥
|
Bit image:
|
|
ESC K, ESC L, ESC Y, ESC Z, ESC [g, ESC * (AGM)
|
Bar code:
|
|
ESC [f, ESC [p
|
Download:
|
|
ESC =
|
| |