 |
 |
|
||
 |
||||
Available Paper Types and Paper Slots
As shown below, you can load single-sheet paper one sheet at a time using the paper guide on top of the printer or the front paper guide. You can print on ordinary single sheets, single-sheet multipart forms, postcards, and envelopes. Your single-sheet paper may be from 100 to 420 mm (3.9 to 16.5 inches) wide.
Note:|
For detailed specifications on the types of single-sheet paper you can use, Paper.
|
|
Using the top paper slot
|
 |
|
Using the front paper slot
|
 |
The table below shows the types of paper you can load in the top and front paper slots and the paper-thickness lever settings for each paper type. For more information on the paper-thickness lever, see Adjusting the Paper Thickness Lever.
|
Paper type
|
Available paper slots
|
Paper-thickness lever position
|
|
|
Ordinary paper
|
Single sheets
|
Top and front
|
-1 or 0
|
|
Multipart forms (carbonless)
|
2 parts (original + 1 copy)
|
1
|
|
|
3 parts (original + 2 copies)
|
2
|
||
|
4 parts (original + 3 copies)
|
3
|
||
|
5 parts (original + 4 copies)
|
5
|
||
|
6 parts (original + 5 copies)
|
7
|
||
|
Postcards
|
2
|
||
|
Envelopes
|
Top
|
2 to 6
|
|
Note:|
If the printed image is smeared, you may need to set the paper-thickness lever one position higher to improve print quality.
If the printed image is faint or has many gaps, you may need to set the paper-thickness lever one position lower to improve print quality.
Do not load paper that is damaged, curled or has been folded.
|