|
|
Control Panel
You can select one of the printer's five fonts and pitch by using the buttons on the printer's control panel, as described below.
Note: |
|
|
Font |
Pitch |
USD |
10, 12 |
HSD |
10, 12, 15, 17, 20 |
Draft |
10, 12, 15, 17, 20, PS |
Roman |
10, 12, 15, 17, 20, PS |
Sans Serif |
10, 12, 15, 17, 20, PS |
Make sure that the printer is not printing. If it is, press the Pause button to stop printing. |
Press the Font button until the three Font lights indicate the desired font as shown below. |
|
|
|
|
USD |
|
|
|
|
HSD |
|
|
|
|
Draft |
|
|
|
|
Roman |
|
|
|
|
Sans Serif |
=on, =off |
Press the Pitch button until the Three Pitch lights indicate the desired pitch as shown below. |
|
|
|
|
10 cpi |
|
|
|
|
12 cpi |
|
|
|
|
15 cpi |
|
|
|
|
17 cpi |
|
|
|
|
20 cpi |
|
|
|
|
PS |
=on, =off |
Make sure that the desired font and pitch are selected. |
Previous |
Next |
Version BPS0030-00, Copyright © 2007, SEIKO EPSON CORPORATION |