EPSON
Home > Scanning Special Projects

Removing Dust Marks

Using the Dust Removal feature in Epson Scan, you can virtually “clean” the dust marks from your originals as you scan them.
Original image
Dust Removal applied
Note:
Before scanning your originals, carefully remove any dust that you can see on them.
When you scan film or slides, the Dust Removal feature is available for Full Auto Mode or Professional Mode only (it is not available for Home Mode). To remove dust marks from color film or slides in Home Mode, use the Digital ICE Technology feature as described in Removing Dust and Scratch Marks from Film and Slides Using Digital ICE Technology.
If you still have dust marks on color film or slides after using the Dust Removal feature, try scanning it again using Digital ICE Technology as described in Removing Dust and Scratch Marks from Film and Slides Using Digital ICE Technology.
Follow these steps to remove dust marks using Epson Scan.
Place your original on the scanner. See one of these sections for instructions.
Documents or photos: Placing Documents or Photos
Film or slides: Placing Film or Slides
Start Epson Scan. See one of these sections for instructions.
Documents or photos:
Film or slides:
When the Epson Scan window appears, do one of the following, depending on the currently selected scan mode.
Home Mode and Professional Mode: Go to step 4.
Full Auto Mode: Click the Customize button, then click the Specify document type for Full Auto Mode checkbox and select the type of original, if necessary. Then click the Dust Removal checkbox and click OK. Continue with step 9.
Note:
For details on using Full Auto Mode when scanning documents or photos, see Using Full Auto Mode. For details on using Full Auto Mode when scanning film or slides, see Using Full Auto Mode.
In Full Auto Mode, you can only scan 35 mm color film strips or color positive slides. To scan other types of film, use Home or Professional Mode.
To change the scan mode when scanning documents or photos, see Changing the Scan Mode. To change the scan mode when scanning film or slides, see Changing the Scan Mode.
Select the basic settings for the type of your original(s), then select the destination setting for the way you will use your image(s). See one of these sections for instructions.
Documents or photos: Selecting Basic Settings
Film or slides: Selecting Basic Settings
Click the Preview button to preview your image(s), then select your scan area. See one of these sections for instructions.
Do one of the following to select the Dust Removal option.
Home Mode: Click the Dust Removal checkbox.
Professional Mode: Scroll down to the Adjustments area and click the Dust Removal checkbox. If you want to increase or decrease the level of the dust removal effect, click the + (Windows) or  (Mac OS X) button next to the option and select a setting in the Level list.
Home Mode:
Professional Mode:
Note:
You can reduce the appearance of surface roughness in your film or slide(s) by clicking the Grain Reduction checkbox. Click the + (Windows) or (Mac OS X) button and select a Level setting to adjust its effect, if necessary.
The result of the dust removal does not appear in the image in the Preview window. You must scan the image first.
Make any other necessary image adjustments. See one of these sections for instructions.
Size your image as necessary. See one of these sections for instructions.
Documents or photos: Selecting the Scan Size
Film or slides: Selecting the Scan Size
Click the Scan button to scan and remove dust marks in your image(s).
What happens next depends on how you started Epson Scan. See one of these sections for details.
Documents or photos: Finishing the Scan
Film or slides: Finishing the Scan