EPSON

Light and Buttons

The scanner has four buttons for scanning operations. The Status light indicates whether the scanner is operating normally.
Note:
The illustration in this section is for the Perfection V330 Photo, but the descriptions also apply to the Perfection V33.
a.  E-mail button
b.  PDF button
c.  Copy button
d.  Power/ Start button
e. Status light

Light

The Status light is between the  Power/ Start button and the  PDF button.
Color
Indicator Status
Meaning
Green
 On
Ready to scan images.
 Flashing
Initializing or scanning.
Orange
 Flashing
An error has occurred. See The Status Light Is Flashing for more information.
(None)
 Off
The scanner is off.

Buttons

Before using the scanner buttons, make sure you have installed Epson Scan and the Epson Event Manager.
Button
Function
 Power/ Start
 Power
Turns the scanner on if pressed once.
Turns the scanner off if held down for 3 seconds while the scanner is on. (You cannot turn the scanner off when the scanning software is running.)
 Start
Epson Scan starts.
 Copy
The Copy Utility starts.
 E-mail
Epson Scan automatically scans, then the Send File Via E-mail window appears.
 PDF
The Scan to PDF window appears.