Light
Buttons
The scanner has four buttons for scanning operations. The Status light indicates whether the scanner is operating normally.
![](files/mark_no.gif) |
Note: |
![](files/01.gif) |
The illustration in this section is for the Perfection V100 Photo, but the descriptions also apply to the Perfection V10.
|
|
a. Scan to E-mail button b. Scan to PDF button c. Copy button d. Start button e. Status light
The Status light is between the Start button and the Scan to PDF button.
Color
|
Indicator Status
|
Meaning
|
Green
|
On
|
Ready to scan images.
|
Flashing
|
Initializing or scanning.
|
Red
|
Flashing
|
An error has occurred. See Reading the Scanner Light for more information.
|
(None)
|
Off
|
The scanner is off.
|
Before using the scanner buttons, make sure you have installed Epson Scan and the Epson Creativity Suite.
Button
|
Function
|
Start
|
Scans and sends the captured image to an assigned program in a single step.
|
Copy
|
Scans and sends the captured image to the Epson Copy Utility.
|
Scan to E-mail
|
Scans and sends an e-mail message with the scanned image attached.
|
Scan to PDF
|
Scans an image or multiple document pages and saves them to the specified PDF file.
|
Documents or photos: See Starting a Scan With the Scanner Buttons.
Film or slides (Perfection V100 Photo only): See Starting a Scan With the Scanner Buttons.
|