Online Reference Guide

Index	Search	Glossary

Contents	Help

Using the Optional Automatic Document Feeder

Cleaning and Replacing the Paper Path Guide

After you have used the Automatic Document Feeder for a long time, a line of dots may begin to appear on the scanned images. If this happens, follow the steps below to clean the paper path guide.

Turn off the scanner.

Remove the paper support.

Turn the Automatic Document Feeder over and then release the clips that hold the paper path guide in place.

Remove the paper path guide.

Clean the paper path guide with a soft, dry cloth.

Reattach the paper path guide, making sure that the paper path guide clips correctly into place.

If the problem persists after cleaning, replace the paper path guide with the spare one that comes with your Automatic Document Feeder.

[Top]