Online Reference Guide

Index
Search
Glossary
Contents
Help

Technical Specifications

Initialization Methods

The scanner can be initialized (returned to a fixed set of conditions) in the following ways:

SCSI

Hardware initialization

The scanner is turned on.
The scanner receives a SCSI Reset signal from
the SCSI interface.

Software initialization

Software sends the ESC @ (initialize the scanner) command.
The scanner receives a SCSI Bus Device Message.

USB

Hardware initialization

The scanner is turned on.
The USB cable is unplugged from the USB port on the scanner.

Software initialization

Software sends the ESC @ (initialize the scanner) command.
The scanner receives a Bus Reset from the USB interface.


[Top]


Previous

Next
Version 1.00E, Copyright © 2001, SEIKO EPSON CORPORATION