Online Reference Guide

Index	Search	Glossary

Contents	Help

Advanced Scanning / Scanning from the Manual Mode

Selecting a Document Source

When scanning a reflective document placed on the document table of the scanner, leave the Document Source set to Flatbed. Other selections are available depending on what is installed. They are the optional TPU: Color Neg. Film, TPU: Monochrome Neg. Film, and TPU: Pos. Film (for the Film Adapter).

Note:

Uninstalled options are not displayed.

Flatbed

Choose this setting to scan reflective documents.

TPU: Color Neg. Film, TPU: Monochrome Neg. Film, TPU: Pos. Film

Select one of them depending on the type of film (negative or positive, color or monochrome) you are scanning while using the Film Adapter. If you are scanning color negative film, select TPU: Color Neg. Film; for monochrome negative film, select TPU: Monochrome Neg. Film; for positive film (or slides), select the TPU: Pos. Film setting.

Note for Perfection 1650 Photo users:

When you change the Document Source from Flatbed to transparent materials (TPU: Color Neg. Film, TPU: Monochrome Neg. Film, or TPU: Pos. Film), a massage appears informing you to remove the reflective document mat.

The settings you used when you closed EPSON TWAIN last time remains effective. Therefore, if you scanned transparent materials by setting the Document Source to TPU: Color Neg. Film, TPU: Monochrome Neg. Film, or TPU: Pos. Film, when you start EPSON TWAIN again and try to scan reflective documents using the reflective document mat, an error massage appears. When this happens, set the Document Source to Flatbed.

[Top]