EPSON

Cleaning the Scanner

To keep your scanner operating at its best, clean it periodically using the following procedure.
Caution:
Do not press the glass surface inside the scanner with any force.
Be careful not to scratch or damage the glass surface inside the scanner, and do not use a hard or abrasive brush to clean it. A damaged glass surface can decrease the scan quality.
Never use alcohol, thinner, or corrosive solvent to clean the scanner. These chemicals can damage the scanner components and the case.
Be careful not to spill liquid into the scanner mechanism or electronic components. This could permanently damage the mechanism and circuitry.
Do not spray lubricants inside the scanner.
Turn off the scanner.
Remove all paper from the input tray.
Unplug the AC adapter from the scanner.
Clean the outer case with a cloth dampened with mild detergent and water.