SCSI Interface

Interface type:

ANSI X3T9.2/375R Revision 10L (SCSI 2)

Functions:

BUS FREE phase
ARBITRATION phase
SELECTION/RESELECTION phase
COMMAND phase
  (Logical Unit Number is fixed to 0 and
  command link function is not supported.)
DATA phase
  Data in phase
  Data out phase
STATUS phase
MESSAGE phase
  MESSAGE IN phase
  MESSAGE OUT phase
ATTENTION condition
RESET condition

Logic level:

TTL compatible

Electrical standard:

ANSI X3T9.2/375R Revision 10L (SCSI 2)

ID Setting:

Selectable from 0 to 7

Terminator:

Internal terminator selectable (enable/disable)

Connector type:

Two half pitch 50-pin connectors