|
Interface type:
|
ANSI X3T9.2/375R Revision 10L (SCSI 2)
|
|
Functions:
|
BUS FREE phase
ARBITRATION phase
SELECTION/RESELECTION phase
COMMAND phase
(Logical Unit Number is fixed to 0 and
command link function is not supported.)
DATA phase
Data in phase
Data out phase
STATUS phase
MESSAGE phase
MESSAGE IN phase
MESSAGE OUT phase
ATTENTION condition
RESET condition
|
|
Logic level:
|
TTL compatible
|
|
Electrical standard:
|
ANSI X3T9.2/375R Revision 10L (SCSI 2)
|
|
ID Setting:
|
Selectable from 0 to 7
|
|
Terminator:
|
Internal terminator selectable (enable/disable)
|
|
Connector type:
|
Two half pitch 50-pin connectors
|
|
Connector pin arrangement:
|
