|
Assigning a Specified Scanning Setting to a Program
By registering a specific scanning operation to a scanner button, you can perform that operation by simply pressing the scanner button.
In Windows, you can also register settings, such as separator processing, save format, and save as/destination.
For Windows
|
Start Document Capture Pro.
|
|
Click Settings from the toolbar at the top of the window.
|
|
Click Add on the Job Management window.
|
|
Make settings for Job Name, Scan, Output, and Destination on the Job Settings window, and then click OK.
|
See help for details on Document Capture Pro.
|
Click Event Settings on the Job Management window.
|
|
Click the arrow in the list next to the action name, then select the action you want to assign. Then click OK.
|
|
Click OK on the Job Management window.
|
For Mac OS X
In Mac OS X, a series of registered operations is known as an Action or a Job.
|
Start Epson Event Manager.
|
|
On the window displayed, select the scanner you want to use.
|
|
Click the arrow in the list next to the action name, then select the action you want to assign. Then click Close.
|
Note:
Frequently used actions are registered in advance in Epson Event Manager.
You can also customize the action by clicking Make Job Settings.
|
| |