Scanning from the Panel

Setup a Job in advance.

Turn on your scanner and the client computer.

Place your original(s) on the document glass or Automatic Document Feeder (ADF).

Press the OK button on the panel.

The scanner searches for an available computer.

Select the computer you want to send the data to, and then press the OK button.

If a group is set for the scanner, you need to set the same group on the computer if you want to display it on the panel.

Enter the password.

If the password entry screen is not displayed, go to the next step.
See help for details on Document Capture Pro.

Select a job, and then press the OK button.

Check the settings, and then press the

button on the scanner.