 |
 |
|
||
 |
||||
Document Specifications
The table below lists the sizes of paper you can load into the input slot.
Only load sheets that are all the same size.
|
Paper size
|
Measurements
|
|
A4
|
210 × 297 mm (8.3 × 11.7 inches)
|
|
Letter
|
215.9 × 279.4 mm (8.5 × 11 inches)
|
|
Legal
|
215.9 × 355.6 mm (8.5 × 14 inches)
|
|
B5
|
182 × 257 mm (7.2 × 10.1 inches)
|
|
A5
|
148.5 × 210 mm (5.8 × 8.3 inches)
|
|
A6
|
105 × 148.5 mm (4.1 × 5.8 inches)
|
|
A8 (Load it in portrait orientation)*
|
52 × 74 mm (2.0 × 2.9 inches)
|
|
Business card
|
up to 1 piece per stack
up to 1.2-mm stack thickness
|
|
Plastic card (including emboss card) (Load it in landscape orientation)**
|
85.6 × 54 mm (3.3 × 2.1 inches)
up to 1 piece per stack
up to 1.2-mm thickness
|
* For Windows only.
** For scanning of plastic cards with shiny surfaces, the results are not guaranteed.
Load only document that meet the following specifications.
|
Size
|
Width: 52 to 216 mm (2.0 to 8.5 inches)
Length: 73.7 to 356 mm (2.9 to 14 inches) |
|
Weight
|
35 to 270 g/m2 (0.1 to 0.6 lb/m2)
|
|
Paper type
|
High-quality paper, Recycled paper
|
Document with the following conditions cannot be loaded directly.
The ink is wet.
The document is ripped or wrinkled.
The document has staples, paper clips, or other objects attached to it; these may damage the feeder mechanism.
The document has folds or two or more sheets are overlapping.
The document has cut-out areas.
The document is a multi-part form or bound.
The document has rear carbon coating.
The document is not paper. For example, if you have loaded a transparent file holder.
The document is transparent.
The document is photo paper.
See Loading Document for instructions on loading your document.