Network Guide

						Index				Search

						Contents				Help

How To / EpsonNet WinAssist Configuration Utility

About Password

A password is required to configure the print server. When you click OK in the setting dialog box or click the Return to Default button, the Password dialog box appears.

To set a password or to change the current password, click Change. The Administrator password dialog box appears.

When you set a password for the first time, leave the Old Password box blank, and enter a password in the New Password box and in the New Password (again) box (up to 20 characters). Then click OK. Passwords are case sensitive.

Note:

The same password is used for EpsonNet WinAssist, MacAssist, and WebAssist.

Since the new password becomes effective after the data is sent to the print server, enter the old password immediately after changing the password.

If you forget your password, you need to initialize the print server. See Initializing Your Printer for instructions.

[Top]