Reference Guide

Index
Search
Glossary
Contents
Help

Problem Solver

Resetting the Printer

There are two ways to reset (return to a fixed set of conditions) the printer.

Reset

Reset the settings for the current emulation mode and interface by holding down ALT and Reset until Reset appears on the LCD panel. You can reset the printer anytime a printout is not being sent on the interface you are using.

Reset all

Reset the settings for all emulation modes and interfaces by holding down ALT and Reset until Reset All appears on the LCD panel. You can also reset all emulation modes and interfaces by turning the printer off and back on.

Note:
  • Reset all clears all print jobs received from all interfaces; be careful not to disrupt someone else's print job.
  • When you initialize the SelecType settings, select SelecType Init in the SelecType Setup menu.
  • To initialize the network password and network settings refer to the administrator's guide.


[Top]

Version 1.00E, Copyright © 2002, SEIKO EPSON CORPORATION