Reference Guide

Index
Search
Glossary
Contents
Help

Setup & Maintenance / Replacing the Consumable Product

Replacement Messages

When you see the following messages on the LCD panel or the window of EPSON Status Monitor 3, replace the appropriate consumable products. You can continue to print for a short time after a message appears, but EPSON recommends early replacement to maintain print quality and extend the life of your printer.

LCD Panel Message

Description

Toner Low

The amount of toner remaining in the imaging cartridges is low.

Worn Fuser

The fuser unit has reached the end of its service life.

Note:
  • Printing is still possible for a while after the Toner Low message appears. However, replace the imaging cartridge at once if the print quality deteriorates.
  • To clear the warning, select Clear All Warning from the control panel's Reset Menu.

If you continue to use the printer without replacing consumable products and a consumable product reaches the end of its service life, the printer stops printing and displays the following messages on the LCD panel or the window of EPSON Status Monitor 3. When this happens, the printer cannot resume printing until you replace the depleted consumable products.

LCD Panel Message

Description

Replace Toner

The imaging cartridge is empty.

Note:
  • In the default setting, this message does not appear.
  • Problems such as printout fading may occur, change the Toner Out setting in the Setup Menu on the control panel to Stop.


[Top]


Previous

Next
Version NPD0274-00, Copyright © 2003, SEIKO EPSON CORPORATION