Reference Guide

Index Search Glossary Contents Help

Problem Solver

Resetting the Printer

There are two ways to reset (return to a fixed set of conditions) the printer.

Reset

Reset the settings for the current emulation mode and interface by holding down ALT and Reset until Reset appears on the LCD panel. You can reset the printer anytime as long as no data is being sent on the interface. However, be careful not to hold down ALT and Reset for more than five seconds, as this will cause the printer to perform Reset All.

Reset All

Reset the settings for all emulation modes and interfaces by holding down ALT and Reset until Reset All appears on the LCD panel. You can also reset all emulation modes and interfaces by turning the printer off and back on.

Note:

Reset All clears all print jobs received from all interfaces with the exception of those stored in the printer's memory by using Reserve Job function. Be careful not to disrupt other user's print jobs.

Print jobs stored in the printer memory, when using any of four features of Reserve Job functions (Re-print, Verify, Stored, and Confidential), remain even if you perform Reset. However, only those jobs stored by using the Stored Job feature remain if you perform Reset All.

When you initialize the SelecType settings, select SelecType Init in the SelecType Setup menu.

To initialize the network password and network settings refer to the administrator's guide.

[Top]