Reference Guide

Index	Search	Glossary

Contents	Help

Safety Information

Laser Printer Precautions

This printer uses laser technology. The following precautions apply whenever you use the printer. Even if you are familiar with other types of printers, be sure to follow these precautions carefully to ensure safe, efficient operation.

Do not touch the areas inside the front and rear covers of the printer, which are marked with the caution labels. If the printer has been in use, these areas may be very hot.

(Visible when the imaging cartridge is removed.)

Do not touch the components inside the printer unless instructed to do so in this guide.

Never force the printer's components into place. Although the printer is designed to be sturdy, rough handling can damage it.

Be sure not to scratch the surface of the drum. When you remove the imaging cartridge from the printer, always set the unit on a clean, smooth surface. Also, avoid touching the drum, since oils from your skin can permanently damage its surface and may affect print quality.

Do not turn the cartridge upside down or stand it on its ends.

Avoid exposing the imaging cartridge to light, and never open the drum's protective cover as this may damage the light sensitive drum. Overexposure of the drum may cause very dark or light areas to appear on printed documents and reduce its functional life.

When handling the cartridge, always set it on a clean, smooth surface.

Do not attempt to modify or take apart the cartridge. It cannot be refilled.

Do not touch the toner and avoid all contact with your eyes.

Allow the imaging cartridge to reach room temperature before installation.

Warning:

Do not dispose of used imaging cartridges in fire, as they can explode and cause injury. Dispose of them according to local regulations.

To get the best print quality, do not store the imaging cartridge in a place subject to direct sunlight, dust, salty air, or corrosive gasses (such as ammonia). Avoid locations subject to high temperatures, humidity, or abrupt changes in temperature or humidity. Also, be sure to keep the consumable components out of the reach of children.

[Top]