Administrator's Guide

						Index				Search

						Contents				Help

Introduction

About Your Printer

Your printer has a built-in Ethernet interface and can connect anywhere on your network using 10Base-T or 100Base-TX. The interface, which is called the Internal Print Server in this manual, automatically selects the correct standard when it connects to a network. In addition, it supports and automatically selects the IEEE 802.2, IEEE 802.3, Ethernet II, and Ethernet SNAP network protocols.

Because the Internal Print Server supports multiple protocols and automatically detects protocols on your network, you can print from Microsoft^® Windows^®, Apple^® Macintosh^®, UNIX^®, and IBM^® OS/2 applications.

Use EpsonNet WinAssist or MacAssist, the configuration utilities provided with your printer, to quickly and easily configure the Internal Print Server to use protocols such as TCP/IP, NetWare, NetBEUI, AppleTalk^®, IPP, and SNMP.

Note:

The EpsonNet WinAssist/MacAssist utility configures the Internal Print Server to work only with protocols that exist on your network. This does not imply that you can use all of the above-mentioned protocols in your network or operating system. The protocols that the Internal Print Server can use may vary depending on the operating systems used and the network configuration.

[Top]