|
|
Installing Components on Your Computer
For Windows Me/98/95, use the following procedure to install the necessary components.
Note: |
|
|
Click Start, point to Settings, and then select Control Panel. |
Double-click the Network icon. Check if the following necessary components are in the list of installed network components on the Configuration menu. If the components are already installed, go to About EpsonNet WinAssist. |
The following table lists the components required for configuring the Internal Print Server with EpsonNet WinAssist.
EpsonNet WinAssist's setting screens |
Necessary components |
TCP/IP, AppleTalk, IPP, SNMP (IP trap) |
TCP/IP |
NetBEUI |
NetBEUI |
NetWare, SNMP (IPX trap) |
NetWare Client such as Client32 or IntranetWare Client |
Note: |
Do not use Novell Client for Windows 95/98 version 3.00 and Novell Client for Windows NT version 4.50 when using the following modes: NetWare 3.x/4.x Bindery Print Server mode, NetWare 3.x Remote Printer mode, NetWare 4.x Bindery Remote Printer mode, and NetWare 4.x/5.x NDS Remote Printer mode. |
The following table lists the components required for network printing.
Printing method |
Necessary components |
LPR or Internet printing |
TCP/IP |
Microsoft Network Shared printing |
TCP/IP or NetBEUI |
Printing via NetWare server |
Some examples of Microsoft components are: |
If the necessary components are not in the list, click Add to install them, as described below. |
For LPR or Internet printing:
Select Protocol and then click Add. Select Microsoft from the Manufacturers list and TCP/IP from the Network Protocols list. Then click OK.
For Microsoft Network Shared printing:
To use TCP/IP, see the description described earlier to install TCP/IP.
To use NetBEUI, select Protocol and then click Add. Select Microsoft from the Manufacturers list and NetBEUI from the Network Protocols list. Then click OK.
Select Client and then click Add. Select Microsoft from the Manufacturers list and Client for Microsoft Networks from the Network Clients list. Then click OK.
For printing via NetWare server:
Select Protocol and then click Add. Select Microsoft from the Manufacturers list and IPX/SPX-compatible Protocols from the Network Protocols list. Then click OK.
Select Client and then click Add. Select Microsoft from the Manufacturers list and Client for NetWare Networks from the Network Clients list. Then click OK.
For LPR, Internet, Microsoft Network Shared printing: Double-click TCP/IP on the Configuration menu to open the TCP/IP Properties dialog box. Set the IP address, the subnet mask, etc. and then click OK. |
Restart the computer. |
The necessary components are now installed. Go to About EpsonNet WinAssist.
Previous |
Next |
Version 1.00E, Copyright © 2002, SEIKO EPSON CORPORATION |