User's Guide

Replacement Messages

When you see the following messages on the LCD panel or the window of EPSON Status Monitor, replace the appropriate consumable products. You can continue to print for a short time after a message appears, but Epson recommends early replacement to maintain print quality and extend the life of your printer.

LCD Panel Message	Description
Worn Photoconductor	The photoconductor unit has reached the end of its service life. You need to prepare a new photoconductor unit and install it into the printer.
Worn Fuser	The fuser unit has reached the end of its service life.
Worn Transfer Unit	The transfer unit is near the end of its service life.

Note:

To clear the warning, select Clear All Warning from the control panel’s Reset Menu.

If a consumable product reaches the end of its service life, the printer stops printing and displays the following messages on the LCD panel or the window of EPSON Status Monitor. When this happens, the printer cannot resume printing until you replace the depleted consumable products.

LCD Panel Message	Description
Replace Toner uuuu*	The toner cartridge for the indicated color is empty.
Replace Photocondctr	The photoconductor unit has reached the end of its service life. Printing has stopped to avoid damage to the engine.
Replace Transfer Unit	The transfer unit has reached the end of its service life.

* The letters C, M, Y, or K appear in this position, indicating the color of the toner to be replaced. For example, the message Y Toner Low means that the amount of toner remaining in the yellow toner cartridge is low.

Note:

Messages appear for one consumable product at a time. After replacing a consumable product, check the LCD panel for replacement messages for other consumable products.