 |
 General
Environmental
Mechanical
Electrical
Standard and approvals
|
Printing method:
|
Laser beam scanning and dry electrophotographic process
|
|
Resolution:
|
4800 RIT*1
|
|
Continuous printing speed*2:
|
A maximum of 35 pages per minute black and white printing on A4 size paper
A maximum of 25 pages per minute color printing on A4 size paper
|
|
Paper feed:
|
Automatic or manual feed
|
|
Paper feed alignment:
|
Center alignment for all sizes
|
|
Input paper supply:
|
|
MP tray:
|
Up to 150 sheets of plain paper (60~105 g/m²)
Up to a 15 mm thick stack of envelopes
Up to a 15 mm thick stack of transparencies
Up to a 15 mm thick stack of labels
|
|
Standard lower paper cassette:
|
Up to 550 sheets of plain paper (60~105 g/m²)
|
|
Paper output:
|
For all paper types and size
|
|
Paper output capacity:
|
Up to 250 sheets of plain paper (60~105 g/m²)
|
|
Duplex:
|
Paper Type:
| Paper Size: |
|
Plain paper
|
A4, B5, A5, Letter (LT), Executive (EXE), Government Legal (GLG), Legal (LGL)
|
|
EPSON Color Laser Paper
|
A4
|
| Printer language: |
ECP/Page printer language
|
|
ESC/P 2 24-pin printer emulation
(ESC/P 2 mode)
|
|
ESC/P 9-pin printer emulation (FX mode)
|
|
IBM Proprinter emulation (I239X mode)
|
| Adobe PostScript3 |
|
Resident fonts:
|
84 scalable fonts, and 7 bitmap fonts
|
|
RAM:
|
128 MB, expandable up to 640 MB
|
*1 Epson AcuLaser Resolution Improvement Technology
*2 Printing speed varies by paper source or other conditions.
|
Temperature:
|
In use:
|
5 to 32˚C (41 to 90˚F)
|
|
Not in use:
|
-20 to 40˚C (-40 to 104˚F)
|
|
Humidity:
|
In use:
|
15 to 85% RH
|
|
Not in use:
|
5 to 85% RH
|
|
Altitude:
|
3,100 meters (10,170 feet) maximum
|
|
Weight:
|
Approx. 34.6 kg (about76.3 lb), excluding the consumables and options
|
|
Durability
|
5 years or 600,000 pages, whichever comes first (under the condition of A4 size, horizontal plain paper)
|
|
|
120 V Model KDAS-1a
|
220-240 V Model KDBS-1a
|
|
Voltage
|
120 V ± 10%
|
220 V-240 V ± 10%
|
|
Rated frequency
|
50 Hz / 60 Hz ± 3 Hz
|
50 Hz / 60 Hz ± 3 Hz
|
|
Rated current
|
Less than 10 A
|
Less than 5 A
|
|
Power consumption
|
During printing
| Average (Color printing) | 357 W | 354 W |
| Average (Black and white printing) | 437 W | 426 W |
|
MAX
| 900 W | 960 W |
|
During standby mode
| 70 W | 71 W |
|
Sleep mode*
|
Up to 21 W
|
Up to 25 W
|
* Completely suspended. Compliant with the Energy Star program.
U.S. model:
|
Safety
|
UL 60950
CSA No.60950
|
|
EMC
|
FCC Part 15 Subpart B Class B
CSA C108.8 Class B
|
European model:
|
Low Voltage Directive 73/23/EEC EMC Directive 89/336/EEC
|
EN 60950
EN 55022 Class B
EN 55024
EN 61000-3-2
EN 61000-3-3
|
Australian model:
|
EMC
|
AS/NZS CISPR22 Class B
|
This printer is certified as a Class 1 laser product under the U.S. Department of Health and Human Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968. This means that the printer does not produce hazardous laser radiation.
Since radiation emitted by the laser is completely confined within protective housings and external covers, the laser beam cannot escape from the machine during any phase of user operation.
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration implemented regulations for laser products on August 2, 1976. Compliance is mandatory for products marketed in the United States. The label shown below indicates compliance with the CDRH regulations and must be attached to laser products marketed in the United States.
| |
Top