Home
Home > Troubleshooting
Reformatting the Hard Disk Drive

To reformat the Hard Disk Drive, follow the instructions below.


Note:

Some printer models do not support this function.

Make sure the printer is turned off.

Hold down the Down button while you turn on the printer.

When you see the message Support Mode on the LCD panel, select HDD Format in the support menu.


Note:

  • After reformatting the Hard Disk Drive, the printer will automatically reboot.

  • When you want to erase only the fonts installed from the optional Adobe PostScript 3 (PS3), follow steps 1 through 3 above. Select PS3 HDD Init when the optional Adobe PostScript 3 ROM is installed.

  • When installing a Hard Disk Drive from a different printer, reformat it with this function.