Interfaces

Interfaces

USB interface

USB 2.0 High Speed mode

Note:

Only computers equipped with a USB connector and running Mac OS 9.x or X and Windows XP, XP x64, Me, 98, 2000, Server 2003, or Server 2003 x64, support the USB interface.

Your computer must support USB 2.0 in order to use USB 2.0 as the interface to connect your computer to the printer.

Since USB 2.0 is fully compatible with USB 1.1, USB 1.1 can be used as an interface.

USB 2.0 can be used with Windows XP, XP x64, 2000, Server 2003, and Server 2003 x64, operating systems. If your operating system is Windows Me or 98, use a USB 1.1 interface.

Ethernet interface

You can use an IEEE 802.3 100BASE-TX/10 BASE-T straight-through shielded, twisted-pair interface cable with an RJ45 connector.

Note:

Ethernet Interface may not be available depending on the printer model.

USB Host interface

USB 1.1 (Mass Storage Class)

Note:

Contact your dealer about supported devices.