 |
 General
Environmental
Mechanical
Electrical
Standard and approvals
|
Printing method:
|
Laser beam scanning and dry electrophotographic process
|
|
Print Quality:
|
4800 RIT*1
|
|
Resolution:
|
600 × 600 dpi, 1200 × 1200 dpi
|
|
Continuous printing speed*2:
|
A maximum of 25 pages per minute black and white printing on A4 size paper
A maximum of 20 pages per minute color printing on A4 size paper
|
|
Paper feed:
|
Automatic or manual feed
|
|
Paper feed alignment:
|
Center alignment for all sizes
|
|
Input paper supply:
|
|
MP tray:
|
Up to 150 sheets of plain paper (60~105 g/m²)
Up to a 15 mm thick stack of envelopes
Up to 75 sheets of transparencies
Up to a 15 mm thick stack of labels
|
|
Standard lower paper cassette:
|
Up to 550 sheets of plain paper (60~105 g/m²)
|
|
Paper output:
|
For all paper types and size
|
|
Paper output capacity:
|
Up to 250 sheets of plain paper (60~105 g/m²)
|
|
Duplex (models with Duplex Unit only):
|
Paper Type:
|
Paper Size:
|
|
Plain paper,
Semi-Thick paper
|
A4, B5, A5, Letter (LT), Executive (EXE), Government Legal (GLG), Legal (LGL)
|
|
Thick paper
|
A4, B5, A5, Letter (LT), Executive (EXE), Government Legal (GLG), Legal (LGL)
|
|
EPSON Color Laser Paper
|
A4
|
|
Printer language:
|
ECP/Page printer language
|
|
ESC/P 2 24-pin printer emulation (ESC/P 2 mode)
|
|
ESC/P 9-pin printer emulation (FX mode)
|
|
IBM Proprinter emulation (I239X mode)
|
|
Adobe PostScript3 (PS3 mode)
PCL6/PCL5 emulation (PCL mode)
|
|
Resident fonts:
|
84 scalable fonts, and 7 bitmap fonts for ESC/Page
93 scalable fonts, and 7 bitmap PCL5c
17 scalable fonts for PostScript3
|
|
RAM:
|
128 MB, expandable up to 1 GB
|
*1 Epson AcuLaser Resolution Improvement Technology
*2 Printing speed varies by paper source or other conditions.
|
Temperature:
|
In use:*
|
5 to 32˚C (41 to 90˚F)
|
|
Not in use:
|
-20 to 40˚C (-40 to 104˚F)
|
|
Humidity:
|
In use:*
|
15 to 85% RH
|
|
Not in use:
|
5 to 85% RH
|
|
Altitude:
|
3,500 meters (11,483 feet) maximum
|
* The recommended environment is 15 to 28˚C (59 to 82˚F) and 20 to 70% RH.
|
Dimensions
|
Height:
|
508 mm (20.0 in.)
|
|
Width:
|
420 mm (16.5 in.)
|
|
Depth:
|
501 to 575 mm (19.7 to 22.6 in.)
|
|
Weight
|
Approx. 27.0 kg (about 59.4 lb) with Duplex Unit
Approx. 26.0 kg (about 57.2 lb) without Duplex Unit
(Excluding consumables and options)
|
|
|
120 V Model KEAS-1
|
220-240 V Model KEBS-1
|
|
Rated voltage
|
110 V-120 V ± 10%
|
220 V-240 V ± 10%
|
|
Rated frequency
|
50 Hz / 60 Hz ± 3 Hz
|
50 Hz / 60 Hz ± 3 Hz
|
|
Rated current
|
Up to 8 A
|
Up to 4 A
|
|
Power consumption
|
During printing
|
Average (Color printing)
|
376 W
|
361 W
|
|
Average (Black and white printing)
|
354 W
|
347 W
|
|
MAX
|
750 W (with Duplex Unit)
730 W (without Duplex Unit)
|
750 W (with Duplex Unit)
730 W (without Duplex Unit)
|
|
During standby mode
|
82 W
|
78 W
|
|
During sleep mode*
|
Up to 17 W
|
Up to 17 W
|
* Values represent power consumption while all operations are completely suspended. Power consumption varies depending on errors and operating conditions, and whether a type B interface card is installed or a USB memory is inserted.
U.S. model:
|
Safety
|
UL60950-1
CAN/CSA-C22.2 No.60950-1
|
|
EMC
|
FCC Part 15 Subpart B Class B
CAN/CSA-CEI/IEC CISPR 22 Class B
|
European model:
|
Low Voltage Directive 73/23/EEC
EMC Directive 89/336/EEC
|
EN 60950-1
EN 55022 Class B
EN 55024
EN 61000-3-2
EN 61000-3-3
|
Australian model:
|
EMC
|
AS/NZS CISPR22 Class B
|
This printer is certified as a Class 1 laser product under the U.S. Department of Health and Human Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968. This means that the printer does not produce hazardous laser radiation.
Since radiation emitted by the laser is completely confined within protective housings and external covers, the laser beam cannot escape from the machine during any phase of user operation.
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration implemented regulations for laser products on August 2, 1976. Compliance is mandatory for products marketed in the United States. The label shown below indicates compliance with the CDRH regulations and must be attached to laser products marketed in the United States.
| |
Top