Interface Card

Installing an interface card
Removing an interface card

Your printer comes with a Type B interface slot. Various optional interface cards are available to expand your printer’s interface options.

Installing an interface card

Follow the steps below to install an optional interface card.

Caution:

Before you install the interface card, be sure to discharge any static electricity by touching a grounded piece of metal. Otherwise, you may damage static-sensitive components.

Turn the printer off and unplug the power cord and interface cable.

Remove two screws securing the interface card slot cover and remove the cover.

Slide and push the interface card into the slot firmly, then fasten the screw as shown below.

Reconnect the interface cable and power cord and turn the printer on.

To confirm that the option is installed correctly, print a Status Sheet. See Printing a Status Sheet.

Top

Removing an interface card

Caution:

Before you remove an interface card, be sure to discharge any static electricity by touching a grounded piece of metal. Otherwise, you may damage static-sensitive components.

Turn off the printer and perform the installation procedure in reverse.

Top