 | Printer |
|
 General
Environmental
Mechanical
Electrical
Standard and approvals
|
Printing method:
|
Laser beam scanning and dry electrophotographic process
|
|
Resolution:
|
2400RIT*1
|
|
Continuous printing speed*2 (with A4/Letter):
|
30 pages per minute for black and white printing
7.5 pages per minute for color printing
|
|
Paper feed:
|
Automatic or manual feed
|
|
Paper feed alignment:
|
Center alignment for all sizes
|
|
Duplex
|
Available paper types are A4, A5, LT, B5 and Executive of plain paper, EPSON Color Laser Paper
|
|
Input paper supply:
|
|
MP tray:
|
Up to 150 sheets of plain paper (64 to 90 g/m²)
Up to 15 envelopes
Up to 60 sheets of transparencies
Up to 50 sheets of labels
|
|
Standard lower paper cassette:
|
Up to 500 sheets of plain paper (64 to 90 g/m²)
|
|
Paper output:
|
For all paper types and size
|
|
Paper output capacity*3 :
|
Up to 250 sheets of plain paper (64 to 90g/m²)
|
|
Internal emulation:
|
PCL5e emulation (LJ4 mode)
|
|
PCL6 emulation (LJ4 mode)*4
|
|
HP-GL/2 emulation (GL2 mode)
|
|
ECP/Page printer language
|
|
ESC/P 2 24-pin printer emulation
(ESC/P 2 mode)
|
|
ESC/P 9-pin printer emulation (FX mode)
|
|
IBM Proprinter emulation (I239X mode)
|
|
Resident fonts:
|
84 scalable fonts, and 7 bitmap fonts
|
|
RAM:
|
64 MB, expandable up to 512 MB
|
*1 Epson AcuLaser Resolution Improvement Technology.
*2 Printing speed varies by paper source or other conditions.
*3 When using transparencies, remove each sheet from the output tray after it is printed to prevent it from curling.
*4 PCL6 emulation is compatible with HP LaserJet4100 PCL6 (Monochrome).
 Top
|
Temperature:
|
In use:
|
10 to 35˚C (50 to 90˚F)
|
|
Not in use:
|
0 to 35˚C (35 to 95˚F)
|
|
Humidity:
|
In use:
|
15 to 85% RH
|
|
Not in use:
|
10 to 85% RH
|
|
Altitude:
|
2,500 meters (8,202 feet) maximum
|
Top
|
Weight:
|
Approx. 37 kg (about 81.5 lb), excluding the imaging cartridge and options
|
Top
|
|
110 V, 120 V Model L481A
|
230 V Model L481A
|
|
Voltage
|
110 V-120 V ± 10%
|
220 V-240 V ± 10%
|
|
Rated frequency
|
50 Hz / 60 Hz ± 3 Hz
|
50 Hz / 60 Hz ± 3 Hz
|
|
Rated current
|
Up to 10 A
|
Up to 6 A
|
|
Power consumption
|
During printing
|
Average
|
335 W*1 / 567 W*2
|
332 W*1 / 583 W*2
|
|
MAX
|
880 W
|
900 W
|
|
During standby mode
|
Average
|
96 W
|
99 W
|
|
Sleep mode*3
|
Up to 21 W
|
Up to 21 W
|
*1 When color printing.
*2 When monochrome printing.
*3 Completely suspended. Compliant with the Energy Star program.
Top
U.S. model:
|
Safety
|
UL 60950
CSA No.60950
|
|
EMC
|
FCC Part 15 Subpart B Class B CSA C108.8 Class B
|
European model:
|
Low Voltage Directive 73/23/EEC
EMC Directive 89/336/EEC
|
EN 60950
EN 55022 Class B
EN 55024
EN 61000-3-2
EN 61000-3-3
|
Australian model:
|
EMC
|
AS/NZS 3548 CISPR22 Class B
|
Laser safety
This printer is certified as a Class 1 laser product under the U.S. Department of Health and Human Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968. This means that the printer does not produce hazardous laser radiation.
Since radiation emitted by the laser is completely confined within protective housings and external covers, the laser beam cannot escape from the machine during any phase of user operation.
CDRH regulations
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration implemented regulations for laser products on August 2, 1976. Compliance is mandatory for products marketed in the United States. The label shown below indicates compliance with the CDRH regulations and must be attached to laser products marketed in the United States.
Top
| 
