|
|
Problem Solver
Paper does not feed from the proper paper source. | |
Cause | What to do |
The paper source setting may not be correct. | Make sure that you have selected the correct paper source in your application software. |
There may be no paper in the paper cassette or MP tray. | Load it with paper. |
Too many sheets may be loaded in the paper cassette or MP tray. | Make sure that you have not tried to load too many sheets of paper. The MP tray accommodates 150 sheets of paper, while the standard lower cassette can hold a maximum of 500 sheets of paper. |
If paper does not feed from the optional 500-Sheet Paper Cassette Unit, the unit may not be installed properly. | For instructions on installing the unit, see Installing the 500-Sheet Paper Cassette Unit. |
The paper type settings in SelecType do not match the settings of the printer driver. This happens when the SelecType Paper Source setting is set to Auto. |
Set the correct paper type for each paper source in the SelecType Tray Menu. Then set the feeding priority by using the MP Mode setting. |
Previous |
Next |
Version 1.00E, Copyright © 2001, SEIKO EPSON CORPORATION |