Reference Guide

Index	Search	Glossary

Contents	Help

Product Information

Printer Parts

1. face-down tray
2. Cover AB
3. front cover
4. control panel

1. MP tray (Multi-Purpose tray)
2. AC inlet
3. power switch
4. USB interface connector
5. parallel interface connector
6. Type B Interface card slot cover
7. Ethernet interface connector

1. transfer unit
2. photoconductor unit
3. waste toner collector
4. developer cartridge

Control panel

1. Error light
2. LCD Panel
3. Back button
4. Up button
5. Enter button
6. Down button
7. Cancel Job button
8. Data light
9. Ready light
10. Start/Stop button

LCD panel	Displays printer status messages and control panel menu settings
Back button Up button Enter button Down button	Use these buttons to access the control panel menus, where you can make printer settings and check the status of consumable products. For instructions on how to use these buttons, see Using the Control Panel Menus.
Cancel Job button	Press once to cancel the current print job. Press and hold for more than two seconds to delete all jobs from the printer memory, including jobs the printer is currently receiving, saving to the Hard Disk Drive, or printing.
Data light (Yellow)	On when print data is stored in the print buffer (the section of printer memory reserved for receiving data) but not yet printed Flashes when the printer is processing data Off when no data remains in the print buffer
Ready light (Green)	On when the printer is ready, indicating that the printer is ready to receive and print data Off when the printer is not ready
Start/Stop button	When the printer is printing, pressing this button stops the printing. When the error light is flashing, pressing this button clears the error and switches the printer to ready status.
Error light (Red)	On or flashes when an error has occurred

[Top]