Administrator's Guide

						Index				Search

						Contents				Help

Troubleshooting

Disabling the Sleep Mode

If the printer receives no data for 30 minutes, it enters the Sleep mode. In this mode, the printer begins warming up as soon as you send a print job; it then warms up and is ready to print in about 65 seconds at rated voltage.

To disable the Sleep mode, follow the instructions below.

Make sure the printer is turned off.

Hold down the Down button while you turn on the printer.

When you see the message Support Mode on the LCD panel, select Sleep Mode in the support menu.

Use the Up or Down button to select Sleep Mode = Disable.

Press the Enter button.

To exit the SelecType mode, press the Start/Stop button.

[Top]