Network Guide

						Index				Search

						Contents				Help

Tips for Administrator

Instructions on Using DHCP

When you assign an IP address to the network interface using the DHCP function, you need to change the printer port setting every time you turn on the printer.

We recommend that you make one of the settings below on the DHCP server or the router and then assign a valid IP address to the network interface:

Assign a valid IP address to the MAC address of the network interface.

Assign an IP address that is within the range of the assignment of the DHCP server. Do not let the DHCP server assign the IP address to any other devices.

If you cannot make the above settings on the DHCP server, make one of the settings below:

Assign an IP address that is not within the range of the assignment of the DHCP server.

Assign an IP address that is within the range of the assignment of the DHCP server. In this case, you must turn on the network interface first, and then turn on the DHCP server.

[Top]