 |
 USB interface
Ethernet interface
Your printer is equipped with a USB interface and an Ethernet interface.
The printer’s built-in USB interface is based on the standards specified in the Universal Serial Bus Specifications Revision 2.0, the Universal Serial Bus Specification Revision 1.1, and the Universal Serial Bus Device Class Definition for Printing Devices Version 1.1. This interface has the following characteristics.
|
Standard
|
Based on Universal Serial Bus Specifications Revision 2.0, Universal Serial Bus Specification Revision 1.1, Universal Serial Bus Device Class Definition for Printing Devices Version 1.1
|
|
Bit rate
|
480 Mbps (High Speed Mode)
12 Mbps (Full Speed Device)
|
|
Data encoding
|
NRZI
|
|
Adaptable connector
|
USB Series B
|
 |
Note: |
|
|
Only computer equipped with a USB connector and running Windows XP x 64, XP, 2000, or Mac OS X.10.x support the USB interface.
|
|
The printer has a built-in Ethernet interface. Use a 10Base-T and 100Base-TX STP (shielded twisted-pair) cable via the RJ-45 connector to connect to the network.
| |
Top