Home
EpsonNet Config for Windows

About EpsonNet Config
System Requirements
Installing EpsonNet Config
Accessing the EpsonNet Config User’s Guide

About EpsonNet Config

EpsonNet Config is a Windows-based configuration software for administrators to configure the network interface for TCP/IP, NetWare, MS Network, AppleTalk, IPP, and SNMP.


Note:
  • Be sure to use EpsonNet Config included on the Software CD-ROM shipped with this product.

  • EpsonNet Config installed on Windows XP/Server 2003 does not support NetBEUI as a search protocol because officially the NetBEUI protocol is not supported on Windows XP/Server 2003.


Note for users of printers supporting NetWare queue-based printing:
  • If you are using the printer in a dial-up environment without running NetWare, clear the Use NetWare check box on the NetWare screen. If this check box is selected, the extra account may be charged when you use the dial-up router.

  • When configuring the network interface for NetWare, use the IPX protocol and log in to the NetWare server or the NDS context with supervisor privileges.

  • When you configure the network interface for NetWare 5.x, you must log in to the NetWare server using an IPX connection. If you log in to the NetWare server using an IP connection, the NetWare screen and the IPX trap setting of SNMP are not available.

Top
System Requirements

The following table lists the system requirements of EpsonNet Config.

Operating systems

Windows Me

Windows 98/98 Second Edition

Windows 95 OSR2 or higher

Windows XP Professional/Professional x64 Edition/Home Edition

Windows Server 2003/Server 2003 x64 Edition

Windows 2000 Server/Professional

Windows NT 4.0 Server/Workstation with Service Pack 5.0 or higher

Hard disk drive space

10 MB

Top
Installing EpsonNet Config

Follow the steps below to install EpsonNet Config on your computer to configure the network interface.


Note:

If you add or delete protocols or services from your operating system after installing EpsonNet Config, EpsonNet Config may not work correctly. If this happens, uninstall EpsonNet Config and then install it again.

Insert the Software CD-ROM in the CD-ROM drive.

The Software Installation screen opens automatically.

    If the Software Installation screen does not appear, double-click EPSETUP.EXE on the CD-ROM.

Make sure that all applications are closed, and then click the Install Network Utility button.

Click the icon located next to EpsonNet Config.

Follow the on-screen instructions to complete the installation.


Note:

If the following screen appears after you start EpsonNet Config, click the Unblock button; otherwise the devices are not listed on the screen of EpsonNet Config.

Top
Accessing the EpsonNet Config User’s Guide

The EpsonNet Config User’s Guide contains detailed information on EpsonNet Config. Follow the steps below to access the EpsonNet Config User’s Guide.

Click Start, point to Programs (for Windows Me, 98, 95, 2000, and NT 4.0 users) or All Programs (for Windows XP and Server 2003 users), select EpsonNet, and then select EpsonNet Config V1. Click EpsonNet Config to start it.

From the Help menu, select EpsonNet Config Help.

    The EpsonNet Config User’s Guide appears. By clicking the links on the left side of the screen, you can get information on using EpsonNet Config.

Top