 |
 |
|
||
|
||||
 |
||||
Indicate the Network Status
LED lights and buttons
The network communication status is indicated via LEDs on printers that do not have an LCD panel.
|
Network status light (a):
|
Mainly displays status of wireless connections
|
|
Network status light (b):
|
Mainly displays status of wired connections
|
Note:|
Shapes of LED lights and buttons vary depending on the model.
If your printer supports wired connections only, the printer will not be equipped with the Network status light (a). The communication status will be indicated by the Network status light (b).
|
|
Status
|
Indication
|
|
|
Wireless
|
Wired
|
|
|
Warming up
|
 (a) (b)Flashing alternately (for printers supporting wireless and wired connections) |
|
|
Disconnected
|
 (a) (b) |
|
|
Connected
|
 (a) (b) |
(a) (b) |
|
Connecting to network
|
(a) (b) |
(a) (b) *2
|
|
Wireless auto setup in progress
|
(a) (b) Flashing alternately PIN: Flashing at the same time |
-
|
|
Wireless auto setup completed
|
(a) (b) *1
|
-
|
|
Wireless auto setup error
|
(a) (b) |
-
|
= off, = on, = flashing*1 The Network status light (b) turns off after five minutes.
*2 If your printer supports wired connections only, the Network status light (b) flashes.
|
Network Buttons
|
|
|
WiFi
|
Press and hold for three seconds to make easy wireless LAN settings.
|
|
Press to release an easy wireless LAN setting error.
|
|
 |
Press to print a network status sheet.
|
|
WiFi +
|
While holding down the WiFi button, press and hold the
button for about three seconds to make easy wireless LAN settings in WPS PIN mode. |
+  |
Turn the printer off, then press both buttons at the same time to initialize network settings.
|
You can confirm the network status as follows on printers that have a Wi-Fi light.
The LED condition varies depending on the network status.
 |
On
|
Connected to a wireless LAN
|
|
Off
|
Not connected to a wireless LAN
|
|
|
Flashing
|
Setting up a wireless LAN
|
Printing status sheet
To confirm the network connection, print a status sheet using the following procedure.
 |
Load a plain paper into the sheet feeder.
|
 |
Press
to print the status sheet. |
Confirm printer status using Web browser
Note:|
This feature is not available for all printers or may not be enabled.
|
You can confirm the printer status via a Web browser.
|
Enter the printer’s IP address to digital device and search for the printer.
|
Note:|
The input format is ‘http//<IP address>’.
|
|
Confirm the printer status.
|
|
|||||||||||||
| |||||||||||||
 (NPD4310-00 EN) |
