 |
 |
|
||
 |
||||
Setting Up Using WSD (for Windows 7/Vista)
The printer supports Windows Vista Web Services on Devices (WSD). This section explains how to set up the network-connected printer using WSD.
Note:|
To set up the printer/scanner with WSD, the computer and printer must be connected to the network.
You must install the driver before setting up the printer/scanner with WSD.
|
 |
Verify that the printer is turned on.
|
 |
For Windows 7: Click Start, Computer, and then Network.
|
For Windows Vista: Click Start and then Network.
 |
Right-click the printer icon, then click Install.
|
Click Continue in the User Account Control dialog box.
Note:|
The icon shows the network printer name (e.g., EPSONXXXXXX (your printer name)). The printer name can be confirmed on the printer’s control panel or a network status sheet. For details on confirming on the control panel or printing a network status sheet, see Confirming and printing the network status.
If Uninstall appears instead of Install, click Uninstall once and retry.
|
 |
Click Your devices are ready to use (Your device is ready to use).
|
 |
Check the screen and click Close.
|
 |
For Windows 7: Click Start and then Devices and Printers.
|
For Windows Vista: Click the Start button, and then Network.
 |
Verify that an icon with the network printer name (e.g., EPSONXXXXXX (your printer name)) is added.
|
To print using WSD, select the printer by its network printer name.
Note:|
To use the scanner function with WSD, use Windows Fax and Scan or Paint in Windows Vista.
The scanner name selected with Windows Fax and Scan or Paint in Windows 7/Vista is the same as the network printer name.
When using commercially available software, see the User’s Guide that came with the software for the scanning procedure.
|