Printer Parts and Control Panel Functions

a.

Paper support: Supports the paper loaded in the sheet feeder.

b.

Sheet feeder: Holds your paper and feeds it for printing.

c.

Printer cover: Covers the printing mechanism. Open only when installing or replacing ink cartridges.

d.

Output tray: Holds the ejected paper.

e.

Edge guide: Holds your paper straight in the sheet feeder. Move the edge guide to the edge of your paper.

f.

USB connector: Connects the USB cable from your computer to the printer.

a.

Cartridge cover: Secures the ink cartridges. Open only when installing or replacing ink cartridges.

b.

Ink cartridge holder: Holds the ink cartridges.

c.

Print head: Prints ink on your paper.

d.

Control panel: Use the buttons and monitor the lights to control your printer. See the next section for details.

power

Press to turn the printer on and off.

maintenance

Press to load paper when the printer is out of paper. Press to eject paper when paper is jammed.

Press to resume printing after a paper out error or multiple page feed error.

Press to cancel printing during a print job.

Press to move the ink cartridge holder to the ink cartridge replacement position when an ink cartridge needs to be replaced.

When an expended ink cartridge is detected, press to move the ink cartridge holder to the ink check position.

After ink cartridge replacement, press to return the ink cartridge holder to its home position.

When the  error light is off, press and hold for 3 seconds to clean the print head.

power

On when the printer is on.

Flashes when the printer is receiving data, printing, replacing an ink cartridge, charging ink, or cleaning the print head.

error

On when the printer is out of paper or paper is jammed.

On when an ink cartridge is expended.

Flashes when an ink cartridge is nearly expended.