Using the Nozzle Check utility for Windows
Using the Nozzle Check utility for Mac OS X
Using the printer buttons

If you find that the printout is unexpectedly faint or that dots are missing, you may be able to identify the problem by checking the print head nozzles.

You can check the print head nozzles from your computer by using the Nozzle Check utility or from the printer by using the buttons.

Note:

If the ink out light is flashing, you cannot check the print head. Replace the appropriate ink cartridge first.

Follow the steps below to use the Nozzle Check utility.

Make sure that A4 plain size paper is loaded in the sheet feeder and that the paper thickness lever is set to the position.

Access the printer software.

Accessing the printer driver for Windows

Click the Maintenance tab, then click the Nozzle Check button.

Follow the on-screen instructions.

Top

Follow the steps below to use the Nozzle Check utility.

Make sure that A4 size plain paper is loaded in the sheet feeder and that the paper thickness lever is set to the position.

Access the EPSON Printer Utility dialog box.

Accessing the printer driver for Mac OS X

Click the Nozzle Check button in the Utility dialog box.

Follow the on-screen instructions.

Top

Follow the steps below to check the print head nozzles using the printer buttons.

Make sure the  On light is on, but not flashing.

Make sure that A4 size plain paper is loaded in the sheet feeder and that the paper thickness lever is set to the position.

Press the Setup button.

Press the or button to display Check Ink Nozzles , then press the  Start button.

Below are two sample nozzle check patterns.

Compare the quality of the printed check page with the sample shown below. If there are no print quality problems, such as gaps or missing segments in the test lines, the print head is fine.

If any segment of the printed lines is missing, as shown below, this could mean a clogged ink nozzle or a misaligned print head.

See Cleaning the Print Head
See Aligning the Print Head

Top