Reference Guide

Index
Search
Glossary
Contents
Help

How To / Maintenance

Cleaning the Printer

To keep your printer operating at its best, clean it thoroughly several times a year, as described below.

Make sure the printer is turned off and all of the printer's lights are off. Then unplug the power cord.

Remove any paper from the sheet feeder.

Use a soft brush to carefully clean away all dust and dirt from the sheet feeder.

If the outer case or the inside of the sheet feeder is dirty, clean it with a soft, clean cloth dampened with mild detergent. Keep the printer cover closed to prevent liquid from getting inside.

If the inside of the printer accidentally gets soiled with ink, wipe it off with a damp cloth.

Warning:
Be careful not to touch the gears inside the printer.

Caution:
  • Never use alcohols or thinners to clean the printer; these chemicals can damage the components as well as the case.
  • Be careful not to get water on the printer mechanism or electronic components.
  • Do not use a hard or abrasive brush.
  • Do not spray the inside of the printer with lubricants; unsuitable oils can damage the mechanism. Contact your dealer or a qualified service person if lubrication is needed.


[Top]


Previous

Next
Version 1.00E, Copyright © 2002, SEIKO EPSON CORPORATION