Home
Home > Maintaining Your Printer
Cleaning the Print Head

Using the Head Cleaning utility for Windows
Using the Head Cleaning utility for Mac OS X
Using the printer buttons

If you find that the printout is unexpectedly faint or that dots are missing, you may be able to solve these problems by cleaning the print head, which ensures that the nozzles are delivering ink properly.

You can clean the print head from your computer using the Head Cleaning utility in the printer driver or from the printer by using the buttons.


Note:

  • Clean the print head only if print quality declines; for example, if the printout is blurry or the color is incorrect or missing.

  • Use the Nozzle Check utility first to confirm that the print head needs to be cleaned. This saves ink.

  • When the  ink light is flashing or on, you cannot clean the print head. Replace the appropriate ink cartridge first.

Using the Head Cleaning utility for Windows

Follow the steps below to clean the print head using the Head Cleaning utility.

Make sure that no lights are indicating errors.

Make sure that A4 size paper is loaded in the sheet feeder.

Right-click the printer icon on the taskbar, then select Head Cleaning.

    If the printer icon does not appear, refer to the following section to add the icon.

Follow the on-screen instructions.

    The  power light flashes while the printer performs the cleaning cycle.


Caution:

Never turn off the printer while the  power light is flashing. Doing so may damage the printer.


Note:

  • If print quality has not improved after repeating this procedure about four times, turn the printer off and wait for at least 6 hours. Then run the nozzle check again and repeat the head cleaning if necessary.

  • If print quality remains a problem after replacing the ink cartridges, contact your dealer.

  • To maintain print quality, we recommend printing a few pages on a regular basis.

Top
Using the Head Cleaning utility for Mac OS X

Follow the steps below to clean the print head using the Head Cleaning utility.

Make sure that no lights are indicating errors.

Make sure that A4 size paper is loaded in the sheet feeder.

Access the EPSON Printer Utility.

Click the Head Cleaning button in the Utility dialog box.

Follow the on-screen instructions.

    The  power light flashes while the printer performs the cleaning cycle.


Caution:

Never turn off the printer while the  power light is flashing. Doing so may damage the printer.


Note:

  • If print quality has not improved after repeating this procedure about four times, turn the printer off and wait for at least 6 hours. Then run the nozzle check again and repeat the head cleaning if necessary.

  • If print quality remains a problem after replacing the ink cartridges, contact your dealer.

  • To maintain print quality, we recommend printing a few pages on a regular basis.

Top
Using the printer buttons

Follow the steps below to clean the print head using the printer buttons.

Make sure that no lights are indicating errors.

Make sure that A4 size paper is loaded in the sheet feeder.

Press and hold down the  ink button for three seconds.

    The printer starts cleaning the print head and the  power light begins flashing.


Caution:

Never turn off the printer while the  power light is flashing. Doing so may damage the printer.

When the  power light stops flashing, print a nozzle check pattern to confirm that the head is clean.
See Checking the Print Head Nozzles


Note:

  • If print quality has not improved after repeating this procedure about four times, turn the printer off and wait for at least 6 hours. Then run the nozzle check again and repeat the head cleaning if necessary.

  • If print quality remains a problem after replacing the ink cartridges, contact your dealer.

  • To maintain print quality, we recommend printing a few pages on a regular basis.

Top